رزین اپوکسی 2 جزئی IPI-Fluid Ceramic مدل: MT-600 - این رزین 2 جزئی دارای پوشش پلیمری / سرامیکی برای حفاظت از محیط داخلی پمپها، دریچه ها، لوله ها، مخازن و دیگر تجهیزات جریان مایع جهت مقاومت در برابر فرسایش، خوردگی، حفره، نفوذ و حمله شیمیایی مورد کاربرد می باشد - وزن رزین بهمراه هاردنر 500 گرم - ساخت کمپانی (Integrated Polymer Industries (IPI آمریکا
IPI-Fluid Ceramic ™
Polymer/ceramic coating for protection of interiors of pumps, valves, pipes, tanks, and other turbulent fluid flow equipment against erosion, corrosion, cavitation, impingement, and chemical attack.
Zero-VOC, two-component, both liquids, ambient cure, brushable,
•Excellent chemical resistance; will withstand chemical attack and corrosion
•Abrasion resistant; resists turbulent fluid flow with suspended solids in it
•Designed for toughest fluid flow problems; such as cavitation, impingement, implosion,
•Advanced non-rusting formula; hence resistant to corrosion
•Rockwell hardness ; R 123, M 88
•Elevated temperature service; 350 oF dry; 180 oF wet; will retain its mechanical properties
•Phenomenal bond strength to steel; one ton per square inch
•Negligibly small cure shrinkage; two mils per inch (build up thicker then grind down if needed)
•High modulus; 350,000 psi; resistance to deformation under sustained loads showing no creep.
•Suitable coefficient of thermal expansion; 1.9 x 10-5 in/in 0F; thermal cycling will not cause delamination
•Zero VOCNo flammability; no fire or explosion risks; no health concerns due to VOCs; no solvent problems (bubbles, pinholes, etc.)
•Factory proportion packagingEasy to use; No weighing or proportioning in the field
•Serving more than 20 industries since 1985