GT-201Series Digital Clamp Meter is powered by a 9V battery, 3-digit LCD display Clamp Meter. It can be used to measure AC and leaving only the voltage, AC current, resistance and continuity test. Frequency, temperature, diode, and has data hold and backlight function. The instrument compact structure, simple operation, easy to carry, is the ideal tool for electrical measurements, has the following characteristics:
1. Designed to meet IEC1010-1 safety and IEC1010-2-032
2.3 digit LCD display character height 16mm.
3. Data Hold function
4. backlighting, delay automatic shut-off, dark environment to facilitate reading.
5. All true full-range overload protection.
6. High resistance guarantee a minimum of measurement errors.
7. Safety, an independent, battery box design, easy to replace the battery.
General Characteristics:
Maximum display: "1999" that is 3 digit
Measuring principle: double integral A / D conversion
Sample Rate: 2-3 times per
Unit display: function, power unit symbol display
Polarity display: Only the highest bit shows "1"
Low battery indication: Display symbol
Data Hold: display the symbol "H"
Backlight "LCD backlight automatically turns off after about 5 seconds.
Working environment: 0-40 Relative humidity 75%
Power supply: one 9V laminated battery, type: IEC6F22 NEDA1604 JIS006P
Clamp measurable conductor diameter: up to 42mm
Dimensions: length 250 * W 99 * H 43mm
Weight: about 480g (including battery and pen)
Accessories: a pair of test leads, a 9V battery, K-type thermocouple 1 (only GT-202)
Instrument Description:
1. AC current clamp, measure AC current.
2. The trigger clamp can be controlled clamp closure.
3.HOLD Data Hold button or the POWER switch.
HOLD key: Press the key lock, the reading will lock the final reading measured simultaneously display the symbol "H", release the button to cancel the hold function.
POWER key: when you press the button to lock the power is turned on and then press the button to unlock the power is turned off.
4.LIGHT backlit keys, this button does not lock, press a key, backlit display for about five seconds after the automatic shutdown. Press again to relight
5. 3 digit LCD display, 7-segment LCD.
6. Ohm jack, resistance measurements, then the red pen
7. The function selector switch, you can choose different functions
8. Temperature readings HOLD jack or hold key
9.COM jack, then black pen
10. The voltage or frequency jack, then the red pen.
All data technical parameters meet relevant standards. This two kinds of clamp meter appearance of generosity, good linear flow and feel comfortable! Lowest price in the industry!